|
| |
| |
DIN-100
Analog Input Modbus Modules
|
|
|
|
| The DIN-100
Modbus data acquisition modules (DAS) are designed for systems based on the Modbus RTU protocol. The modules convert analog input signals to digital data and
transmit via RS485 to a controller which may be a computer or other
processor-based equipment. The DAS modules provide data acquisition from a wide variety of sensors and perform all signal
conditioning, scaling, linearization and conversion to either linearized ASCII
data values or Modbus percent of full scale binary values.
The DIN-100 data
acquisition modules can measure temperature, load cells, bridges, voltage,
current, frequency, as well as digital inputs and digital outputs.
|
|
|
|
|
The DIN-100
series is designed to be mounted on the industry standard DIN rail.
|
| |
| Measurement
Types: |
| |
| DIN-110 |
Voltage |
+/-10mv,
+/-100mV, +/-1V, +/-5V, +/-10V, +/-100V |
| DIN-120 |
Current |
4-20mA |
| DIN-130 |
Thermocouple |
J,
K, T, E, R, S, B, C |
| DIN-140 |
RTD |
.00385,
.00388, .00392 |
| DIN-145 |
Thermistor |
2252
Ohm, Honeywell TD Series |
| DIN-150 |
Bridge |
+/-30mV,
+/-100mV |
| DIN-160 |
Frequency |
1 Hz to 20KHz |
| DIN-170 |
Digital
I/O |
Digital
I/O Modules |
| DIN-190 |
Converters |
RS-232
to RS-485 Serial Converters |
|
|
|
|
